Tools/Maintenance

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. There is a special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - With holding function (HF) securely holds the hexagon socket screw on the tool

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

Showroom™ Polish & Protectant with Ceramic Technology delivers maximum luster, it repels water, and prevents grime buildup. Your bike and components will stay clean for longer intervals. Showroom is safe for use on clear coat, carbon fiber, aluminum, titanium, steel, chrome, and stainless steel. Simply spray on and let sit for 10 seconds. Then wipe off with a clean rag. Due to Showroom’s proprietary formulation there is no need to pre-wash the bike. Enjoy the shine! Showroom Polish & Protectant will: - Clean frames and components without a prewash - Protect the bicycle from water and perspiration - Prevent a buildup of grit and grime - Keep your bicycle looking new

Maxima Plush Dynamic is an advanced specialty fluid formulated for high-performance suspension systems. Formulated and tested with OEM engineers and designed for use in lower fork legs and multiple other non-damper components. Surface active technology reduces static and dynamic friction and considerably lowers the force needed for easy breakaway, providing smooth action throughout the entire range of travel. Contains special seal conditioners for extended seal life. Ultra-clean detergents keep the system clean and off long-life, trouble-free operation. For all lower fork legs and other non-damper suspension components, including All Mountain, XC, Gravel, Downhill, Enduro, and Freeride. Also approved for use in some dropper seat post designs. NOTE: Rockshox will be listing Plush Dynamic as the lower lube to use in all MY23 + beyond forks. Dynamic Light is a direct replacement for 0w30 in all forks specifying the use of Rockshox 0w30. Features: - High-performance lube for lower fork legs. - Dynamic Lube activates on loaded bushings and seals. - Reduces static (stiction) and dynamic (running) friction. - Proprietary additive system minimizes wear and keeps the system clean. - Long-life fluid extends the time between rebuilds.

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Machined, chamfered tips allow easier insertion into hex fittings - Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy - Sliding T-handle creates increased leverage and multiple access positions

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!

FRESH out the bowels of Muc-Off Research and Development comes the NEW Bio Grease! Designed specifically for bicycle use, Muc-Off Bio Grease possesses a unique formula that prevents corrosion and water ingress so your bike’s components will last long into the future! Use Muc-Off Bio Grease to increase your performance, and ensure every ride will be smoother than your last. Muc-Off *Biodegradable Bicycle Grease is specifically blended for the unique ‘low speed’ applications found on bicycle parts where reducing friction is paramount. This premium formulation is based on renewable resources, and has a combination of extreme pressure lubricity additives and natural ‘slip’ giving it unrivaled performance in its class! Bio Grease also has the added benefit of being readily biodegradable and extremely resistant to water wash off, which helps prevent corrosion, reduce friction and improve the performance of moving parts. The guys at Muc-Off are dedicated to making eco friendly products that won’t harm you, your bike or the planet and Bio Grease is no exception. This new grease is fully biodegradable and free from any nasty petroleum based oils! NOT for use on Bicycle chains *Only contents are biodegradable. - Prevents corrosion and water ingress so your bike’s components will last longer - Specially formulated for "low speed" applications unique to bicycle parts, where reducing friction is paramount - Extremely resistant to water wash-off, which helps prevent corrosion, reduce friction and improve the performance of moving parts - Fully biodegradable and free from petroleum-based oils

- Used to install fork dust seals

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon Gold RL A4 (2018+)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon Gold RL A4 (2018+)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

- 5 DART plugs for use with the Stan's NoTubes DART tool

Tri-Flow Synthetic Grease is specially formulated to lubricate any surface that slides, glides, rolls, twists, turns or spins. - Non-melting, waterproof formula designed to seal out water and contaminates and prevent rust and corrosion under extreme temperatures - Fully compatible with most rubbers and plastics

Includes two rotating brushes, two sponges and two wicking pads already installed in a composite cartridge, ready to snap into the CM-25 Professional Chain Scrubber (sold separately.

- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Red handle for 0.8-1.0mm spokes - Black handle for 1.0-1.3mm spokes

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Multi-tool for DT aero spokes, torx, and square nipples

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.

Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.

The TRY-1 Parts and Beverage Tray is twelve inches in diameter, looks great on the workbench and will carefully hold anything from derailleurs to tallboy cans to pint glasses. It has a tacky surface coating that will keep objects from sliding around and can easily switch from business to party by placing your favorite beverage on its no-slip surface.

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

Regular chain and component cleaning is a chore no more with Finish Line's Starter Kit 1-2-3. It starts with Finish Line's popular Multi Degreaser for cleaning, and their versatile Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too. Then, after cleaning, get your bike running smoothly and silently again with the included Finish Line Dry Teflon lube and you're good to go!

- Specialty high performance assembly grease that excels in a multitude of heavy duty and light duty applications - Delivers unmatched thermal stability and extreme pressure performance - Oil-soluble formulation provides exceptional protection against corrosion, water washout and wear.

REAR SHOCK SERVICE KIT BASIC- MONARCH WITH AUTOSAG SPECIALIZED B1

RockShox Glass Fiber Reinforced Nylon Non-Scratch O-Ring Pick Tools (Qty 5, for use on suspension products)

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-3 has 1.3mm tips on bent nose blades for medium, external snap rings.

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-2 has 1.3mm tips on bent nose blades for medium, internal snap rings. The tips of the RP-2 open from 22mm down to 2mm (center to center).

Professional quality ring plier made from forged, heat-treated cro-moly steel with a return spring and vinyl dipped grips. The RP-5 has 1.7mm tips on straight blades for small, internal snap rings. The tips open from 22mm to 0 (tips touching).

Forged with Chrome Vanadium (CR-v) steel, precision ground, heat-treated, plated and polished. The PAW-6 opens to 24mm and features a laser engraved measurement scale and dipped blue handle for comfort.

Designed and built especially for singlespeed bikes, Park's SS-15 Single Speed Spanner is a durable forged-steel tool with a 15mm socket wrench for axle nuts, 15mm open-end wrench for pedals, a tire lever, and a bottle opener. It's just the right size to take along on rides and is great for wrenching in your shop too.

- Pocket sized chain tool that mates perfectly with Topeak ratchets and torque tools - Compatible with single and multispeed chains up to 12 speed including Capagnolo chains - Includes a 4/5mm allen key and a chain hook as well as a rubber clip to hold

- Foil sealed bottles to ensure freshness of fluid

Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.

Portland Design Works' 3wrencho is a strong and versatile addition to your fixed gear, townie or workbench! Made of heat-treated steel for extra toughness, it's part tire lever, part 15mm wrench. Its strong nylon coating won't scratch rims, so you can pry as hard as you need to remove stubborn tires. Step on the 3wrencho for extra leverage to loosening axle nuts. May also be used to spread peanut butter, stir a drink, or open a letter. - Length: 114 mm (4.5") - Weight: 95 g (3.5 oz)

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

Park Truing Stand parts to get truing stands back into tip-top working condition. The TS-2TA.3 installs quickly and easily into Park Tool Professional Truing Stands — including the TS-2.2 & TS-2 — for full compatibility with thru axle hubs.

The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized. - Hex 3/4/5mm - Torx T-20/25 - Phillips #1 - 4 or 5Nm max torque - Bit holder included

Clean bikes run smoother and perform better. Finish Line's Premium Bike Care Value Pack is a 3-pack of their best-selling products: Multi Bike Degreaser, Dry Teflon Bike Lube, and Super Bike Wash Concentrate. These three 4-ounce bottles make it easier than ever to keep your ride in premium shape.

Maxima Plush Dynamic is an advanced specialty fluid formulated for high-performance suspension systems. Formulated and tested with OEM engineers and designed for use in lower fork legs and multiple other non-damper components. Surface active technology reduces static and dynamic friction and considerably lowers the force needed for easy breakaway, providing smooth action throughout the entire range of travel. Contains special seal conditioners for extended seal life. Ultra-clean detergents keep the system clean and off long-life, trouble-free operation. For all lower fork legs and other non-damper suspension components, including All Mountain, XC, Gravel, Downhill, Enduro, and Freeride. Also approved for use in some dropper seat post designs. NOTE: Rockshox will be listing Plush Dynamic as the lower lube to use in all MY23 + beyond forks. Dynamic Light is a direct replacement for 0w30 in all forks specifying the use of Rockshox 0w30. Features - High-performance lube for lower fork legs. - Dynamic Lube activates on loaded bushings and seals. - Reduces static (stiction) and dynamic (running) friction. - Proprietary additive system minimizes wear and keeps the system clean. - Long-life fluid extends the time between rebuilds.

Park Tool's professional-quality Snap Ring pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl dipped grips. The RP-1 has .9mm tips on straight blades for small, internal snap rings. The tips open from 22mm to 0 (tips touching).

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-4 has 1.7mm tips on bent nose blades for larger, internal snap rings. The tips open from 21mm down to 2mm (center to center).

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-7 is a dual sided wrench that features a 30mm opening on one end and a 32mm opening on the other.

Wall or pegboard mounted holder designed specifically for Park's P-Handle Hex Wrenches. Positions wrenches for easy access with easy-to-read size designation for each tool. Tools sold separately.

Wall- or pegboard-mounted holder designed specifically for our P-Handle Torx Compatible Wrenches. Positions wrenches for easy access with easy to read size designation for each tool. Tools sold separately.