Hubs
$3.40
Parts for repair and maintenance of DT Swiss hubs.
$22.75
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
$30.00
15x142mm conversion kit for Hope Fatsno front hubs.
$30.00
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
$75.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
$75.00
Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.
$76.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do.
They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability.
Front hub specs:
- Weight: 198g
- Torque Spec: 33nm (25ft lbs.)
- Non-Drive Side Center to Flange: 34mm
- Drive Side Center to Flange: 34mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
Rear hub specs:
- Weight: 234g
- Torque Spec: 33nm (25ft.lbs.)
- Non-Drive Side Center to Flange: 29mm
- Drive Side Center to Flange: 29mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
$87.99
Bontrager Affinity Comp 12-Speed XDR Driver Body
- Replacement freehub bodies for Bontrager Comp level hubs
- Compatible with Race, Affinity Comp, and Rhythm Comp
$87.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 110mm forks
- Flange diameter: 58mm
- NDS flange offset: 25.5mm
- DS flange offset: 37.75mm
- 28 hole, 6-bolt rotor
$87.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 100mm forks
- Flange diameter: 58mm
- NDS flange offset: 20.5mm
- DS flange offset: 32.75mm
- 28 hole, 6-bolt rotor
$89.90
- Kick-shift 2-speed hub
- Coaster brake
- Benefits include its simple backpedal-action shifting/braking and no cables or shifters
- 6061 aluminum hub shell with 13/32" slotted solid axle (162mm overall axle length)
- Gear ratio range of 138%
- Includes 22 tooth 3-spline cog
- 116mm OLD (over-locknut dimension)
$89.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only
$116.99
Dust off that truing stand for a fresh wheel build.
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
PRODUCT DETAILS
- Bontrager front hub for use with 110mm OLD fork and 20mm thru-axle
- Flange diameter: 58mm
- NDS flange offset: 26mm
- DS flange offset: 38mm
- 32 hole, 6-bolt rotor
$116.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 150mm forks
- Flange diameter: 58mm
- NDS flange offset: 45mm
- DS flange offset: 53.5mm
- 32 hole, 6-bolt rotor
$120.00
Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology.
The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag.
One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4.
Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability.
Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity.
As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings....And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels.
Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use.
Features
>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm
$140.00
Hope XD-11 Freehub Bodies
· Converts Hope Pro 2 hubs to work with XD Driver
· Contains axle, endcaps, bearings and driver
$175.99
Dust off that truing stand for a fresh wheel build.
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
PRODUCT DETAILS
- Bontrager rear hub for use with 157mm dropouts
- Rapid Drive 108 hub instantly transfers effort into forward momentum
- Flange diameter: 58mm
- NDS flange offset: 40mm
- DS flange offset: 37mm
- 32 hole, 6-bolt rotor
- Equipped with Shimano 7-speed freehub
$179.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
Page 1 of 2
Next page