Parts & Accessories

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

Pair of EndCaps for Yakima CoreBar.

Pair of EndCaps for Yakima JetStream bars.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Rear wheel strap for Boa bike mount. Includes one strap.

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

Thru-axle adapter for the Kuat TRIO rack.

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty

An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles. - Enables transportation of bikes with 20x110 mm thru-axle forks

The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. - Sold as a set of two - Replacement parts for broken or lost end caps

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

Long Wheel Replacement Straps (2 Pack)

Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.

Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp. - Includes 2 FatStraps to carry one fat bike - Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"

Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. Product Specs: - Weight: 0.25 lbs. - Dimensions: L 2.75 in x W 1.50 in x H 0.50 in - Limited Lifetime Warranty

Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.

Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.