Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Surly Monkey Nuts
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
Surly Cable Hanger
$10.50
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.
Surly Constrictor Seatpost Clamp
$15.00 - $16.90
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
SRAM PowerLock Link Chain Connector
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Surly Stainless Seatpost Clamp
$20.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.
Cane Creek 3G Thudbuster Rebuild Parts and Tool Kit
$39.00
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost. - Rebuild bushing tools - LT arm screws (M4 x 20mm) - Saddle clamp bolt (M5 x 35mm) - Saddle clamp spherical washers - Saddle clamp adjustment knob
Problem Solvers Single Chainring Bolts - 6mm
$8.99 - $17.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
KMC Missing Link 10-DLC
$16.00
- Compatible with KMC, Shimano 10 speed chains - DLC Coated - Reusable - No Tool Required - Card of 2 pairs
SRAM Direct Mount Derailleur Cover
$16.00
• Covers the unused high-mount front derailleur mount on 1x-equipped bikes • Black anodized aluminum
Giant TCR ADV/ADV SL Seatpost Clamp
$26.00
-Seatpost clamp for TCR ADV/ADV SL models (2009-2016)
Giant Defy/Avail Advanced Seatpost Clamp
$26.00
-Seatpost clamp for Defy/Avail models (2009-2016)
Giant Aero Bar Pad Kit
$21.00
Replacement foam pads for Giant Contact clip-on aerobar clamps
Giant ISP/Vector/D-Fuse Seatpost Di2 Battery Holder
$9.00
-Seatpost mounted Di2 Battery Holder for ISP/Vector/D-Fuse models
Giant Stratus 2.0 Handlebar Tape
$23.00 - $24.00
- High-Friction PU Surface Improves Grip And Reduces Slipping - Microfiber Backing Provides A Smooth, Comfortable Feel - Embossed Diamond Pattern Looks Powerful And Improves Overall Grip - 2.0mm Thick
Giant Direct Mount KSA 18mm Adjustable City Kickstand 24-29-inch
$26.00
Features - Non E-Bike rear-mount kickstand - Adjustable leg assures the perfect fit for all frame sizes (Non E-Bike) Fits: - Seek - 2013-2016 - Roam - 2013-2018+ - Rove - 2013-2018+ - Enchant - 2017+ - Escape Disc - 2017+ - BeLiv - 2018+ - BeLiv City - 2018+ - ATX - 2018+ - ARX - 2018+ - FastRoad 2017 - AnyRoad Adv - 2018+ - Talon- 2018+ - Alight- 2018+ - Tempt- 2018+ - Thrive- 2018+ - Sedona DX- 2018+ (Does NOT fit Sedona or Sedona W)
Giant Connect SL S-Bend Carbon Aerobar Extensions
$105.00
Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.
Giant Defy/Avail Seatpost Clamp
$9.00
-Seatpost clamp for Defy/Avail models
Problem Solvers Seatpost Shim
$9.99 - $15.90
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
Zipp Vuka Clip Aerobar with Vuka Carbon Extensions
$250.00
The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in high-performance carbon fiber, in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance. - Diameter: 31.8 - EVO 70/110: Weight: 480g, Length: 360mm - Race: Weight: 480g, Length: 330mm
Wheels Manufacturing Inc. Derailleur Hanger 16
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-16 has 14.33 mm between the two holes (center-to-center) and 6.51mm between the two vertical plates.
Wheels Manufacturing Inc. Derailleur Hanger 138
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-138 are 23mm apart, center-to-center. Do not confuse this hanger with Wheels Mfg DROPOUT-120.
Wheels Manufacturing Inc. Derailleur Hanger 359
$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #959371-8-7 - Attaches to frame with (1) M3x8 Flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 374
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in Colorado to exacting tolerances. - Dropout-374 is the direct mount version of dropout-284 - Replaces specialized part # S182600003 - For use with Shimano direct mount rear derailleurs - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (1) M5x10 socket head screw (fastener not included)
Wheels Manufacturing Inc. Derailleur Hanger 20
$27.00
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances using the finest US-made aerospace quality aluminum. - CNC-machined 6061 aluminum - Black anodized finish - Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 39
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long)
Wheels Manufacturing Inc. Derailleur Hanger 11
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 144
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 154
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 248
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x8 Flat head screws included Note: This dropout can be used in place of Wheels Mfg DROPOUT-246. The only difference is the number of fasteners.
Wheels Manufacturing Inc. Derailleur Hanger 308
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with either (1) M4x12 or M4x16 Socket Head Screw - Fasteners not Included - For 12x142 and 12x148 Thru Axle - Replaces Niner Part #28-013-13-00-20
Page 1 of 19 Next page