Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Brakes/Levers/Pads
$113.00
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop.
- Streamlined form optimized for road use
- CenterLine track offers quiet brake operation
- Two-piece design reduces weight
$8.00
Disc Brake Service Kit for Elixir
- Includes pistons, seals, and bleed screws
$11.00
Disc Brake Service Kit for 05-07 Juicy
- Includes pistons, seals, and bleed screws
$17.00
RockShox Brake Post Kit for most RockShox forks.
- Includes 2 posts & 2 washers
$133.00
The Neo-Retro is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability.
- Compatible with drop bar levers and short pull mountain bike levers
- Modeled after the popular Mafac Tandem cantilever
- Sealed pivot system with adjustable spring tension and Kool Stop pads
- Recommended for standard pull (not linear pull) brake levers
- Made in USA
$133.00
- Works well as a rear brake where the Neo-Retro may cause heel clearance problems
- Compatible with drop bar levers and short pull mountain bike levers
- Sealed pivot system with adjustable spring tension and Kool Stop pads
- Recommended for standard pull (not linear pull) brake levers
- Made in USA
$180.00
- Mini-v brake for use with standard short pull (road) brake levers
- Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile
- Short curved arms give plenty of clearance for cyclocross tires or wide fenders
- Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength
- Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel
- Made in USA
$188.50
- Reversible 6061 aluminum arms for left or right cable routing
- Quick-release noodle is lined with Teflon for smooth action
- High tension square wire springs
- Thinline threaded pads with easy-to-adjust arm hardware
- Made in USA
$19.99
Origin-8's Power V-Type Levers are a great choice for linear-pull (also called "direct-pull" and "V-Brakes") and mechanical-disc brakes. They are made of light and tough forged aluminum with Kraton rubber inserts for improved control and comfort every time you hit your brakes. Plus they have built-in reach adjustment and barrel adjusters for easy brake fine-tuning, too.
$8.99
The Gost pads feature a unique design to make install and set up easier.
- Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame
- Assembly is simplified by lining up the rim and tightening a M6 female bolt
$8.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking.
- Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
$13.99
The Springfield lever features an easy to install and remove design.
- Easy to install and remove without having to wrestle grips on and off
- Die-cast clamp design
$18.99
The 1999 Sidepull Brake is a lightweight brake kit for BMX.
- Includes brake, lever and cable
- Reach is 66-90mm
$19.99
The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy.
- For rear use only
$22.50
The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options.
- Fits 7/8" bars, has a hinged bracket, and does not include cable knarps
$22.50
The Monolever features smooth edges and a clean look.
- Fits 7/8" bars, has a hinged bracket, and does not include cable knarps
- Replaceable hardware to eliminate stripping
$34.99
The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy.
- For rear use only
$56.99
The Odyssey Evo 2.5 Brake features a wider space to accommodate larger tires.
- Forged from aluminum for strength
- More clearance for larger tires
- Front or rear brake compatible
- Includes all necessary hardware
$79.99
The Odyssey Evo 2.5 Brake features a wider space to accommodate larger tires.
- Forged from aluminum for strength
- More clearance for larger tires
- Front or rear brake compatible
- Includes all necessary hardware
$65.99
This individual left Microshift ADVENT brake only drop bar lever matches other externally-routed microSHIFT drop bar shifters for a clean aesthetic.
$7.75
- Plastic clip prevents pistons from pressing in while wheel is off of the bike
- Fits: Marta, Louise, Clara, Julie
$9.91
BAT adjuster dial kit for Magura brakes.
$13.23
Replacement EBT screws close the bleed port on Magura brakes.
- Torque spec: 0.5 nM
- T25 head
$15.40
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$15.40
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$15.40
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$15.40
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$16.92
Magura hs33/hs11 compression sealing washer bag of 20
- Small parts used to install hydraulic hose for Magura disc brakes.
- Compatible with Campagnolo H11 brake/shift levers
$17.00
Magura speed sensor magnet for disc rotor.
- Compatible with Magura Storm HC 180mm rotor
- Compatible with Magura MDR-C 180mm and 203mm rotors
$18.98
Magura hose cover for mt brakes (sleeve nut)bag/10
- Small parts used to install hydraulic hose for Magura disc brakes.
$19.31
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only.
- Sold individually
$19.70
Magura Caliper Cover Ring Kit
$19.70
Cover kits for Magura brake levers.
$19.70
Cover kits for Magura brake levers.
$19.70
Cover kits for Magura brake levers.
$20.94
Magura hs33/hs11 sleeve nut bag of 10
- Small parts used to install hydraulic hose for Magura disc brakes.
- Compatible with Campagnolo H11 brake/shift levers
$22.00
Magura sleeve nut for mt brakes bag/10
- Small parts used to install hydraulic hose for Magura disc brakes.
$26.53 - $48.99
- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing
$27.42
- Reinforced hydraulic tubing designed for Magura mineral-oil fluid
- Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit
- Sold each: (1) kit per brake
- Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately
- Choose black or white options for MT Next and MT series
$27.50
7 Series Disc Brake Pads
- The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes
- Set of two disc brake pads and two pad retaining bolts for one caliper
$29.00 - $34.00
- Black: all-around performance compound
- Salmon (Kool Stop): high grip compound for race/trials use
$29.59
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$29.59
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$29.59
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$29.99
Magura olives (compression ferrule) bag/20
- Small parts used to install hydraulic hose for Magura disc brakes.
- Compatible with Campagnolo H11 brake/shift levers
$30.90
Magura ebt connector fitting for hs33/hs11 m9 thread
- Small parts used to install hydraulic hose for Magura disc brakes.
$31.75
7 Series Disc Brake Pads
- Comfort compound offers greater modulation and longer wear life than the Performance compound, but less power
$31.75
9 Series Disc Brake Pads
- One piece connected back plate
- Comfort compound offers greater modulation and longer wear life than the Performance compound, but less power
- Pair of disc brake pads for one MT5, MT7 caliper
$31.75
Magura type 3. 1 performance pads for louise 2002-6 and louise fr
- Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation.
- Steel backing plate
$31.75
Magura type 4. 1 performance pads julie 2008 and prior
- Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation.
- Steel backing plate
$31.75
Magura type 5. 1 performance pads for marta 2008 and prior
- Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation.
- Steel backing plate
$33.00
8 Series Disc Brake Pads
- Disconnected two piece back plate
- The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes
- Set of four disc brake pads and two pad retaining bolts for one caliper
$33.00
Lockrings for Magura rotors.
$33.76
Magura replacement lever blades for use with HS33 hydraulic rim brake levers.
- Made from durable aluminum casting
$34.02
- For long tours these pads offer safety together with excellent performance in all situations.
- For MT disc brake 2 piston
- 2 single brake pads, 2 pad retaining bolts
$34.02
9 Series Disc Brake Pads
- One piece connected back plate
- Performance compound offers excellent bite for strong braking response in a variety of conditions
- Pair of disc brake pads for one MT5, MT7 caliper
$34.02
Magura type 5. 2 endurance pads for marta 2008 and prior
- Endurance series disc pads feature a harder organic compound than the Performance series, giving them a longer wear life but less power.
- Steel backing plate