Lighting

Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)

Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

Recon-E Light to Shimano motor unit connector cable.

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Product details: - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16-degree offset for optimized use on seatposts

- Replacement aero mount for Numen light

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights

Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement

- Be safe and be seen with hi-viz red LED safety lights - 360-degree visibility with rapid blink, slow blink, and full glow LED modes - Sweat-proof, water resistant design moves with you - Lightweight material for ultimate comfort - Dimensions: 2.68cm x 3.03cm x 1.02cm

Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.

Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.

Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain. - Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists

Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

Key features: - Replacement InnerGlo LED light strips for select Bontrager Town clothing - Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants - Sold individually

Three bright LEDs with over 270 degrees of weather-resistant visibility. Send the right signal Added visibility. Flare 1 is powered by three ultra-bright LEDs that provide over 75 hours of run time on only two AAA batteries. Batteries included—when else does that ever happen? Product details - Be seen with Bontrager's focused optics and over 270-degree visibility - Three bright white, environmentally-friendly LEDs - Three modes—steady high beam, flashing and random flashing - 80+ hour run time - Includes AAA batteries and a seat post clamp

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.

CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.

The Blinky Safety Light Set features a white headlight and a red taillight, both with super bright LEDs for top-notch visibility and safety. They also have flashing and steady modes providing 220 degrees of light that can be seen from up to 1 mile. Plus, these small flashers are weatherproof, light and durable. The included batteries deliver 100 hours of run time. And, handlebar, seatpost and seatstay mounts are included so they're super easy to put on your bike.

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

Amber side safety lights that are as cute as a button The Button Blinky Amber safety side lights are the perfect way to complete 360 degrees of visibility on your bike. The strong rubber straps are designed to mount to multiple points on your bike, including your fork, stem, top tube, down tube, seat post and rear stays. The little lights have two modes and offer run times of up to 85 hours on replaceable CR2032 batteries. These little lights are brilliant, easy to mount, and cute as a button!

Planet Bike's futuristic Spok Headlight is soon to become your favorite commuting companion. Don't let its size fool you—this little guy's got a big beam. The super-bright Nichia eXtreme LED provides major light, so not only are you sure to see everything, but everyone's sure to see you. Plus, the mounting strap fits all sizes and shapes of handlebars, the hood keeps light out of your eyes, and you get up to 100 hours on the included battery. There's even a keychain hole for portability!

Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.

Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

Topeak's WhiteLite Race's two super-bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 140 hours of use! Plus, the WhiteLite Race features a super-simple no-tools rubber strap handlebar mount that works on any bike. Just push the lens to toggle the light's modes!

Planet Bike's Beamer 3 Headlight boasts 3 super-bright white Nichia eXtreme LEDs with steady and flashing modes to provide excellent visibility. And, the soft-touch switch makes it easy to change settings, even with gloves on. The Beamer also features a quick-release handlebar mount that attaches in seconds without tools. Plus, the included 2 AA batteries deliver run times of up to 100 hours.

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)