Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Giant RideSense ANT+/BLE Sensor
$58.00
Take your riding to the next level with the addition of speed and cadence. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet
Wahoo RPM Cadence Sensor (BT/ANT+)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
CycleOps BlueGiga USB Dongle
$29.99
The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
Wahoo ANT+ USB with Extension Cord
$39.99
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
CycleOps ANT+ Mini USB Stick
$38.99
Connect your desktop to CycleOps VirtualTraining.
Bontrager Blendr Garmin Low Mount
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Blendr GoPro Mount
$19.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Wahoo RPM Speed Sensor (BT/ANT+)
$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Bontrager DuoTrap Digital Speed/Cadence Sensor
$69.99
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
Bontrager Insta-Mount
$19.99
Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible. • Mount your hard-shell smart phone case to your bike • Allows for easy access of phone on stem or handlebar • Includes Insta-Mount, universal mount, and application grid • Blendr-compatible
CycleOps ANT+ Micro USB Adapter
$19.99
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Bontrager Computer Batteries
$3.99 - $24.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Paul Component Engineering Stem Cap Light Mount
$48.00
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
XLAB Torpedo Versa 200
$87.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
K-Edge Gravity Top Cap Mount
$24.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge Go Big Pro Handlebar Mount
$29.99
The new Go Big Pro is the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. Key Features and Benefits: - STRONG – CNC machined aluminum mount engineered to hold your camera securely in place no matter the terrain. - STABLE – High quality video footage with a solid platform to prevent shake you would get from a plastic option. - POSITION – Out front and low, the ideal location for mounting from the bars and the most popular position for on-bike footage. - EASY – Hinged handlebar clamp for ease of installation and removal. Simple 1-bolt hinged clamping system, quick and easy. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. Any action camera utilizing the GoPro interface. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge Go Big On-Center Mount
$39.99
The new Go Big On-Center Mount the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. On-Center give you a better framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm and 35mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge Garmin XL Mount
$49.99 - $54.99
The Garmin XL Computer mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that K-Edge's replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-Edge provides free replacement inserts, as needed. Attributes (specs): - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers – Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Combo Compatible – Add the Action Camera Adapter or the complete Combo Mount for the added benefit of using both a computer and GoPro style interface action camera or
K-Edge Wahoo ELEMNT Combo Mount
$64.99 - $69.99
Out-front computer mount for Wahoo Element computers. This is the next generation of industry-leading Wahoo Computer Mounts – stronger, easier, more versatile, and more stylish design to compliment your Wahoo and your bike. The ultimate upgrade for your Wahoo computer. The advanced co-polymer Wahoo insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Combo Compatible – versions available that support GoPro style interface action cameras and lights. All cameras utilizing a GoPro interface, GoPro HERO series, GoPro Sessions’ series Cameras. - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY (Garmin- black, WAHOO- blue, SIGMA – red), and breakaway in a crash to protect the computer body. K-EDGE Combo Mounts are designed to hold Garmin, WAHOO and SIGMA cycling computers and Go Pro, Shimano, Garmin VIRB X sized cameras and standard sized cycling lights (Light and Motion Urban or Niterider). Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Garmin Silicone Case (Edge 820)
$14.99
Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
SRAM eTAP Battery Charger
$45.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
Bontrager Softstrap Heart Rate Replacement Strap
$32.99
Key features: - Replacement strap for Bontrager Heart Rate Belt - Perfect option when the strap loses stretchiness or gets funky - Not compatible with other heart rate monitors
Garmin Quick Release Kit (Forerunner 935)
$29.99
Go from wrist to bike in seconds with your compatible Forerunner GPS running/triathlon watch. Includes quick release bracket, wrist bracket, bike mount, 2 pins, 2 screws, 6 bike mount o-rings and installation screwdrivers.
K-Edge Garmin Sport TT Mount
$39.99
A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference. - For 22.2mm diameter aero bar extensions - Compatible with all Garmin EDGE computers - Highly adjustable for multitude of mounting positions - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - GoPro Interface Compatible - Weight: 29g - Anodized Colors: Black, Red, Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
K-Edge K-EDGE Garmin Race Mount
$54.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Garmin 820, 520, 510, 500, 25, 20 - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black, Red, Blue, Red/Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
K-Edge Wahoo Sport Mount
$29.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
K-Edge GO BIG Pro Saddle Rail Mount
$39.99
The GO BIG Pro Saddle Rail Mount is designed to lock your Go Pro interface action camera or light securely under your saddle with unquestionable reliability. All-aluminum design improves video clarity by removing the “plastic mount shake.” - Fits all standard 2-rail saddles including oversized carbon rails - Compatible with all GoPro Cameras, and like cameras utilizing the GoPro Interface - Adjustable vertical angle position - Gives the Tour de France Go Pro angle of oncoming riders behind you - The K13-1430 available in anodized Black only. - 38 grams
Quarq ShockWiz
$329.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Giant Garmin Computer Mount for Contact SLR Integrated Handlebars
$16.00
Features - Mounts underneath Contact SLR Aero Integrated handlebars - Adjustable length - Alloy construction - Hardware included
Giant RideSync Mount Tray for Computer/GoPro Mount
$11.00
Replacement mount tray for Giant/Liv computers
Page 1 of 5 Next page