Tools/Maintenance

Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate.

Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.

Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots. - 4 fl. oz. (118 mL) bottle NOTE: Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration.

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap

Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Park Tool is world-renowned for their bicycle industry tools, and their pumps are no exception. Keep yours up to speed and working smoothly with these rebuild kits. - 1096K: Contains one #1081 head as well as one #1075 plunger gasket for older PFP-2 and first generation PFP-4 floor pumps. Also compatible with second-generation PFP-4 floor pumps. - 1096X: Contains one #1096R head, one #1472 fitting, and one #1075 plunger gasket for second generation PFP-4 floor pumps. Also compatible with PFP-2 and first-generation PFP-4 floor pumps. - 1096Z: Contains one #1096R head, one #1472 fitting, and one #1087 plunger gasket for PFP-5 and PFP-7 floor pumps. Also compatible with PFP-3, PFP-6, and PFP-8 floor pumps.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 24mm wrench fits Shimano 15mm through-axle front hubs and many suspension-fork top caps. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park Cone Wrenches are made of durable tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and strength. The 28mm size fits newer Shimano 20mm through-axles, as found on XT, XTR and Saint hubs. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

It's a spoon! It's a fork! Park's Stainless-Steel Spork is a take-along culinary multi-tool made from high-quality, rustproof stainless steel with a comfortable vinyl-coated handle. Who said nutrition has to come from energy bars? Pack your favorite eats and Park's Spork for enjoying on-the-ride snacks and mid-repair munchies in style! The Spork has a hole for carrying it on a keychain or hanging it on your workbench.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

• Penetrating all purpose lubricant with PTFE • Repels moisture and prevents rust and corrosion • Use on chains, cables and pivot points • Loosens rusted and corroded nuts and bolts • Ideal for all conditions wet, dry, road and trail • 12 ounces

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

- Film forming lubricant designed to protect moving components and wear surfaces during assembly and initial break-in - Shields metal-To-metal contact and offers excellent rust and corrosion protection during long service periods and storage - Formulated with high levels of anti-Wear and extreme pressure additives and surface active chemistry to reduce friction. Two times zinc activates at both high and low operating temps providing unsurpassed protection. Non-Foaming

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

Prestalever is Quicker and Speedier than anything you've ever used. Our Patent-Pending Rim Hook with Honeycomb reinforced Box-Section Design is the key to our faster, safer, easy-to-use tool. Remove tires in seconds! Prestalever is Quicker and Speedier than anything you've ever used. Our Patent-Pending Rim Hook with Honeycomb reinforced box-section is the key to our faster, safer, easy-to-use tool. As you scoop the tire bead with the Prestalever, the slot underneath we call the "rim hook" naturally drops inside the rim. It prevents the Prestalever from slipping out, so you don't drop the bead. The rim hook stops the Prestalever at an easy-to-hold angle on the side of the rim. Then you simply glide the lever around the rim, and the tire peels-off as you go. The Prestlever is made of slippery Nylon, greatly reducing the force needed to remove tires. When you're done, twist the Prestalever 90 degrees to raise the rim hook out of the rim. Our box-section design allows the twist-action to easily stop at 90 degrees so the lever slides out easily. Install tires without strain. Our thick tip on the tire installer-end prevents catching and pinching tubes inside your tire. The bead-grabbing edge gives the right balance between leverage and lifting force, making it as easy as possible to complete tire installation. Presta Core tool is now essential. Even Bicycle Presta tubes now include removable cores. This gives you the added option of using tire sealant inside the tube of your standard tire. Removable cores are not always fully tightened at the factory. A loose core could cause slow leaks, or could even become unscrewed while using inflation devices. Tubes should be checked during installation and regularly afterwards for Presta core tightness. Don't carry an extra tool for chains! The Prestalever quick-link breaker is an effective emergency tool if you need to remove your chain on the road. The Patented design is the creation of Prestacycle's good friend and associate – cycling engineer Tomo Ichikawa. It removes the quick-link, which is the only function you need. When quick links are installed, pedal pressure can lock the installed quick link without any tools. For regular chain service, we still recommend a quick link tool, but with our feature, you no longer need to carry a separate tool with you on the bike. Quick-link removal Instructions: Place the quick Link near the top of the crank Jump the chain forward one tooth so the quick-link stands-up Use the slot on the Prestalever to push down FIRMLY. (The crank tooth will support the other end from underneath.) T-handle Tubeless Tire Plugger (optional parts required – Available 12/15/2021) The center of the Prestalever has threads which accept our Tubeless tire plugger. It then forms a T-Handle for effective, centered pushing of the included "Bacon Strips" used to seal large cuts in Tubeless tires. Third-hand Tool for Hand Installation Certain tires have delicate beads. Tire manufacturers recommend hand-installation only. The Prestalever can be used as a "third-hand" tool. When you hand-install the bead in one direction, the tire starts lifting-out at the other end. Insert the lever at one end to hold the bead, then use BOTH hands to install the tire from the other end. Tubeless Tire Removal (or any Difficult Tire) The Prestalever is the #1 tool for removing difficult tires. Using two or three can help with the toughest tire and wheel combo's. Insert a lever, but do NOT flip it yet. The rim hook will hold the lever in place, but unlike traditional levers that hook onto spokes, the bead will NOT be tensioned. You can still fit-in more Prestalevers. Insert the levers spaced about 6 inches apart, then flip them all … one-at-a-time. Even the toughest tires will come right off the rim in seconds. Prestalever is different… designed from the start with real-world experience on bicycles. Specifications: - One-end: purpose-designed Tire Remover - The-other-end: purpose-designed Tire Installer - Presta Valve Core tool - Quick-link Chain breaker. - Threads make it a T-Handle Tubeless Tire plugger (plugging kit additional). - Use multiple levers for tough, delicate tires like Road Tubeless and Gumwall. - Dimensions: 100mm x 13mm x 12mm - Weight: 13 grams Disclaimer: Check with the manufacturer of your wheels and tires to verify application and fit. Some manufacturers specify hand installation and removal only. Always follow Manufacturer guidelines for tires and wheels.